feldspar mineral processing

PTMS MAGNETIC SEPARATOR

what is magnetic separation process？

Wet type iron remover type of iron removal equipment, there are two kinds of processes applied in industrial production! Dry processing and wet processing, roughly hard kaolin is designed and produced by dry method, and soft kaolin is developed by wet method. Process beneficiation process Dry process is a simple and economical process. The produced ore is crushed to 25 by a hammer crusher. After the application of the grid powder iron remover in industrial production is two 4mm, what is the electromagnetic separator is added to the cage crusher to reduce the particle size to 6.35mm, the hot air in the cage crusher will be the moisture of the kaolin From the 20% produced to about 10%. The wet type iron remover is easy to install, disassemble and use, and can remove most of the iron slag and iron filings in the powder. Kinds: dry process and wet process The permanent magnet separator price increases the product quality.

Some of the work can not be carefully planned and arranged. For any negligence, even if the same sampling point is missed, the price of the permanent magnet separator is less than the same one. If the same data is missing, the whole test result can be affected, and even the whole Inspection and test data are invalid. Electromagnetic iron remover! In this regard, the same single machine check is designed.

The beneficiation stage must include hydraulic classification, iron removal, selective flocculation, magnetic separation, chemical treatment (bleaching), etc. to remove different impurities. The prepared slurry is firstly washed by a squatting tank, floated by a floatation classifier or a cyclone, and then divided by a continuous centrifuge, a hydrocyclone, a hydraulic sorter or a vibrating fine screen (325 mesh). It is two grades in thickness. The wet iron remover can be installed in a slurry tank, and has the beneficial effects of good iron removal effect and not easy to be damaged.