water cooling electromagnetic separator for Feldspar
PTMS MAGNETIC SEPARATOR
what is magnetic separation process ？
Today we will introduce in detail what is the basic structure of the iron remover.
1, the basic structure of the iron remover
The wet permanent magnet separator is mainly composed of a cylinder, a magnetic system and a cylinder, and is composed of a transmission part. The cylinder is welded by a 2-3mm stainless steel plate, and the end cap is cast aluminum, stainless steel screw and cylinder. The motor drives the cylinder to rotate through the reducer. The magnetic system is an open magnetic system inside the cylinder. The magnet is bolted with stainless steel to a yoke on the floor, the shaft yoke is extended, and the arm is fixed at the end. Adjustable magnetic pull force (rotor angle, can be used after the adjustment rod is fixed. The working area of the tube is made of stainless steel plate, frame and other parts of the barrel are welded with ordinary steel plate.
Basic structure of the iron remover
2, the working principle of the iron remover
After the pulp enters the barrel through the tank, water is sprayed under the action of the water supply flow, and the particles are loosely entered into the barrel to reach the mining area. Under the action of the magnetic field, the magnetic mineral particles appear together and form a "magnetic group" or "magnetic flux", and the "magnetic group" or "magnetic flux" is adsorbed on the cylinder by the action of the magnetic force and toward the pole. Since the polarities of the magnetic poles rotating along the cylinder are alternately arranged and fixed during operation, the "magnetic group" or "magnetic flux" in the cylinder rotates, alternating magnetic stirring, mixing in the "magnetic group" or "magnetic" of the gangue When the magnetic mineral is closed, it is finally sucked onto the surface of the cylinder, and the "magnet" or "magnetic lotus" is concentrated. Concentrate the cylinder to the weak point at the edge of the magnetic part and discharge it into the concentrate tank under the flushing water flow of the mineral water hose. The pulp contains non-magnetic or weakly magnetic minerals with a mud discharge trough called tailings.
The above is about the structure of the iron remover. After reading it, is there a deeper understanding of the iron remover?
