Welcome to Foshan Powtech Technology Company Limited!https://www.powtechina.com
Wet iron remover equipment introduction
published date: 2019/5/5

water cooling electromagnetic separator for mining

PTMS MAGNETIC SEPARATOR

what is magnetic separation in chemistry ?

Iron remover is one of the most widely used and most versatile models for the recovery of iron powder powder particles. Iron separators are widely used in recycling, wood industry, mining, ceramics, chemicals, food and other projects. The iron remover is suitable for magnetite ore below 3mm, pyrrhotite, calcined ore and ilmenite wet magnetic separation material, and is also used for iron removal materials such as coal, non-metallic minerals and building materials.

 

According to the dry and wet classification of ore, it can be divided into: dry iron remover and wet iron remover. The wet iron remover has three different forms of cylinder or counterflow cylinder, downstream cylinder and semi-reverse flow cylinder.

Mine selection wet type iron remover equipment

(1) Semi-reverse flow type

The direction of entry of the pulp is half that of the cylinder, but half of it. Unlike the downstream, the pulp runs in a circle. Since the pulp is dispersed into the water of Song Sanzhuang, the magnetic force in the direction of the inclusions and the pulp can be prevented, which is advantageous for recovering 0.5 mm. Because of the thickness of the ferromagnetic ore, the surface of the pulp is smooth, so it is unstable. So the application is more extensive.

(2) Countercurrent type

The pulp enters the opposite direction of the tube, focusing on one side of the feed, tailings and the other side. Strong magnetic minerals use 0.6 mm thick, clear, ε high (because the tailings discharge point is far from the feeding nozzle, the selection is not complete), but low beta (due to the differential magnetic dual function).

Wet magnetic separator equipment in bathtub

(3) Input downstream

The direction of pulp entering is the same as that of the cylinder, concentrated on the other side, and the tailings are discharged directly at the bottom. Commonly used 6-0 mm strong magnetic mineral rough selection, choose ε high β (due to strong magnetic dual function) but not well handled (for round The relative speed of the cylinder and the pulp is low, and the cleaning effect is poor).

That is the relevant introduction about the characteristics of wet iron removal equipment, hoping to help home.

Share to:

Powtech Machinery Company produce magnetic separator, Industrial Magnetic Separators, Industrial magnetic separation equipments,Magnetic Equipment,Permanent Suspension Magnet,Vibrating Equipment