magnetic separator price
PTMS magnetic separation
what is magnetic separation in Quartz?
he suspended iron remover is designed to eliminate the impurity metal on the products carried by belt conveyors, vibrating conveyors or inclined platforms. The filter belt is mainly used to protect crushers, shredders and other machines to remove iron particles and purification products (the industry is similar to foundries, coal mines, cement plants, food plants, sponge iron plants, coking coal plants, glass factories, chemical industry plants and life). Garbage recycling plant). Use a permanent tape separator when automatic removal of iron-containing contaminants is required. If not, it is more appropriate to fix the permanent suspension magnet.
Iron remover application:
Five types of iron removers are designed to operate at predetermined working gaps on the conveyor: 100, 150, 200, 250 and 300 mm.
The speed of the belt, the nature of the product, the density, the particle size and the dimensions of the parts that must be extracted are all parameters to consider when selecting the type.
construction:
The two U-blocks are fixed to the magnet by fastening ears and support the bearings of the drum. The drum is equipped with a shaft mounted on a detachable hub. All bearings are equipped with piles for tightening the belt.
The belt is connected to the motor/gearmotor by a reduction gear.
Magnet unit:
The magnet is made of high-strength barium ferrite magnets that provide magnetic power throughout the installation process. A non-magnetic stainless steel plate is provided to cover the magnetic poles of the magnet. No power supply or maintenance is required.
installation:
These units can be mounted directly on the terminal head pulley or laterally on the conveyor. In both cases, it is necessary to anticipate non-magnetic products under a magnetic field.
The most effective position is the straight line (Figure 1) above the head pulley. The material conveyed is in a virtual suspension, so it is easier to extract the impurity iron.
Very good results were obtained by combining permanent magnet tapes and permanent magnet tapes at the end of the discharge.
