magnetic separator supplier

PTMS magnetic separation

what is magnetic separation ?

The high temperature in summer will have different effects on various instruments. For the maintenance of machinery, in addition to the daily procedures, some other programs should be added. Let our iron remover smoothly pass the test of summer heat.

It is especially important to maintain and maintain the equipment during the use of the iron remover. In summer, the humid air is increased, and the self-unloading iron remover needs correct regular maintenance to ensure the normal operation of the iron remover.

Summer maintenance method:

1. Regularly check the power supply circuit to prevent motor damage caused by short circuit, check whether the motor fan is worn, add the lubricating oil of the reducer, and drive the roller bearing to all the inspections. If the heat is found, replace it in time, pay attention to the belt wear.

2. During the working process, the bearing oil temperature may rise due to continuous operation of the equipment or other reasons. Then you need to stop working immediately, find the direct cause, and carry out maintenance.

3, the bearing is very important for the iron remover, special attention should be paid to the maintenance of the bearing. Regular lubrication can extend the service life of the bearing.

4. It is especially important for the summer maintenance of the electromagnetic iron remover. To ensure the protection against rain and moisture, check whether there is moisture in the iron remover. If found, please contact the manufacturer for maintenance.

5. When moving and using the iron remover, the working surface should be protected from severe impact and vibration. The electromagnetic iron remover installed in the outdoor installation must be equipped with rainproof facilities to check the line from the iron remover to the control cabinet.

I hope that through the above methods, your iron remover can also spend the summer safely.