kaolin clay magnet requirements
PTMS MAGNETIC SEPARATOR
what is magnetic separation process？
One: Pipe type permanent magnet automatic iron remover
1: structural characteristics
RCY-ZX series pipeline permanent magnet automatic iron remover consists of three parts: pipe body, driving device and magnet running device. The driving device is installed on the pipe wall. The magnet running device is operated by the sprocket and chain to drive the magnetic separation chamber inside the pipe. The permanent magnet discharges the ferromagnetic substance mixed in the material in the pipeline through the tap hole to the outside of the pipeline.
2: Working principle
The iron remover is connected in series with the inclination angle of 45-75 degrees. When the material flows through the iron remover, the ferromagnetic substance is adsorbed onto the stainless steel pipe wall of the pipe separator, and gradually moves with the permanent magnet. Sliding in the direction of the taphole to separate from the material. At the tapping point, due to the permanent magnet moving away from the direction of the circular motion, the ferromagnetic material loses its magnetic attraction and is discharged from the taphole under the action of gravity, so that the material can be automatically removed.
3: Features
The device uses high residual magnetization to obtain NdFeB as a magnetic source, which has high iron removal efficiency and long service life.
The power source adopts a low-power cycloidal pin gear reducer motor. The transmission adopts a precision roller chain, which has the advantages of small size, light weight, reliable and stable operation, small failure, etc. The user is convenient to use and easy to maintain.
The structure of the device is reasonable, compact and easy to install, and can be used in series in the material conveying pipeline.
The iron removal process is continuous and automatic, and there is no need to take care of the equipment after it is started.
Applicable to closed material conveying system, no dust escapes during work, no environmental pollution.
The pipe wall is made of special wear-resistant materials, and the service life is doubled.
4: Scope of application
Pipe type iron remover is a high-performance automatic magnetic separation equipment, which can be widely used in cement, electric power, ceramics, brick, chemical, food, glass, metallurgy, steel and other industries. It is the first choice for material purification and safe operation of subsequent equipment. Iron removal equipment.
Two: liquid or slurry pipeline type iron remover
Liquid or slurry pipeline type iron remover This series of iron remover has stable magnetic properties, high magnetic field strength and no mechanical failure. It is suitable for removing iron from liquid and slurry low pressure conveying pipes. When the iron is cleaned, the iron removal is manually removed to remove the iron impurities, and the shape and flow rate of the end face can be designed and processed according to user requirements.
Three: Pipeline manual unloading permanent magnet iron remover
RCYA1, RCYA2 series pipe permanent magnet iron remover includes non-magnetic pipe and permanent magnet. It is specially used to remove iron from non-magnetic materials in closed pipe. The permanent magnet separator uses high-performance hard magnetic material to form composite magnetic system. It has the characteristics of small volume, large magnetic force, light weight, clean iron, convenient, no energy consumption and long service life. It is suitable for occasions where there is no conveyor belt and only the chute can be provided. When the bulk material passes through the pipeline type permanent magnet iron remover, the iron debris is adsorbed by the high field strength permanent magnet. When the iron impurities are removed, the special door of the pipeline is opened to remove the impurities. Mainly used in cement, chemical, plastic, refractory materials, building materials and other industries to remove debris in the cutting pipeline.
