wet high intensity magnetic separator

PTMS MAGNETIC SEPARATOR

what is magnetic bead separation ？

Most of the magnetic motor breakers are mechanical contact type, and can also be transistor type. Some magnets also have some additional components. 1 Start Accelerator: Installed on a single-type magneto. When starting, the angular velocity of the magneto is increased near the top dead center of the crankshaft to increase the voltage and ensure ignition. 2 Centrifugal ignition advance angle adjustment device: mounted on a single-type magneto, the ignition advance angle can be increased with the increase of the rotational speed. 3 Some magnets are equipped with separate coils for lighting power supply.

   The magneto is the ignition source in the ignition system of the gasoline engine. The magneto ignition system consists of a switch, an ignition coil, a breaker, a capacitor, a distributor, and a discharge device. It generates a high-voltage power and distributes it to the spark plug of each cylinder. Most of the magneto motors use a rotating magnet type structure, which can be divided into a single type and a flywheel type according to the overall design. The one-piece type is that the above-mentioned components are integrally formed and mounted on the internal combustion engine; the flywheel type is to mount the magnet on the internal combustion engine flywheel, and the other components are respectively mounted on the internal combustion engine, and are mostly used in a single-cylinder machine.