magnetic separator supplier

PTMS magnetic separation

what is magnetic separation in Feldspar？

Suspension method

The suspension installation method is divided into two types: inclined and horizontal, which are all related to the work of the iron remover positioned at a certain position of the conveyor belt.

Installation location selection

(1) The space is spacious, which facilitates the transportation and lifting of the iron remover.

(2) Facilitate the iron removal and removal of the iron remover.

(3) Easy to install and fix the track.

(4) Preferably, it is installed above the transitional idler of the conveyor head drive drum at the apex of the feed drum or close to the drive drum.

Tilted installation

(1) When the iron is removed above the conveyor belt head, the belt type iron remover shall be installed in a longitudinally inclined manner. The main drive roller of the iron remover is in the low position. Inclination angle α=15°-30°, S=R

(2) When removing iron in the upper and lower sections of the conveyor belt, the longitudinal direction of the belt type iron remover must be vertically suspended from the direction of the conveyor belt, allowing lateral tilting installation. The inclination angle α is consistent with the inclination angle of the upper and lower sides of the large belt, but Maxmax<18°.

Horizontal installation

In addition to the upper and lower mountain sections, the large conveyor belts are mostly horizontally operated, and the iron remover can be lifted horizontally above any horizontal section of the large belt.

Walking device selection

(1) Belt type iron remover contains permanent magnet and electromagnetic), generally choose manual walking trolley. Heavy-duty belt type iron remover is preferably a two-track manual combination travel frame: light type belt type iron remover generally chooses single-track combined walking or monorail bicycle hanging.

(2) Non-belt type electromagnetic iron remover: Electric walking trolley must be selected. In order to automatically control the electric suction, discard the iron. Light type, especially the three-point lifting iron remover, generally chooses electric monorail bicycle hanging. Heavy-duty four-pointer iron remover can choose electric two-track or single-rail combination travel frame. The electric monorail combination travel frame can be selected for heavy duty three lifting points.