electromagnetic separator manufacturer

PTMS MAGNETIC SEPARATOR

what is magnetic separation in science？

The main reasons for this reason are as follows: 1. If the material layer is too thick, the magnetic force will not penetrate the material layer, and the material layer should be even and uniform; 2. The material separation plate is deformed or not straight, which leads to inaccurate use of the material and should be corrected. Dispensing plate; 3, the belt is not flat or the rotation speed is not stable enough, resulting in parabolic instability, the material is not accurately divided; 4, the most important problem is also related to the quality of the magnetic separator, is the magnetic roller, the magnetic roller is The supplier is the easiest to mix with water. The magnetic roller belongs to the precious material model. The cost of the first one is saved. The magnetic roller is still selected. You can wipe it up with a wrench. It is difficult to take it off by normal hand. 5. The assembly of the magnetic roller is dangerous and special work, and the process quality is also uneven in the market. It is prone to problems such as bending, beating, and matching gaps. These problems have a fatal effect on magnetism or soil removal. The process control is not good. The two are controlled by the quality of the supplier. The landlord can only check and confirm that the magnetic roller can't be repaired by himself. Magnetic separator