magnetic separator for sale

PTMS magnetic separation

how to separate two magnets ？

The direction of the ore feeding is basically the same as the direction of attraction of the magnetic field. The pulp enters the sorting space from the lower part of the bottom of the tank, and the magnetic ore particles are more easily attracted to the surface of the cylinder, and the magnetic field that is transferred to the edge of the magnetic system with the cylinder is the most The weak place is discharged into the concentrate tank. The non-magnetic ore particles or the magnetically weak ore particles flow through the left edge of the magnetic system against the direction of rotation of the cylinder, and the gap between the bottom plate and the cylinder can be adjusted within a certain range (30 to 40 mm).
This type of magnetic separator can obtain higher quality iron concentrates. At the same time, good recovery rate can be obtained. Therefore, the semi-reverse flow magnetic separator has been widely used in production practice. It is suitable for the rough selection and selection of ferromagnetic minerals with fine particles less than 0.2mm. It can work in multiple stages to achieve multiple selections.