water cooling electromagnetic separator

PTMS MAGNETIC SEPARATOR

what is magnetic separation in science？

The wet type permanent magnetic cylinder magnetic separator mainly consists of a cylinder, a roller, a brush roller, a magnetic system, a tank body and a transmission part. The cylinder is rolled into a cylinder from a 2-3 mm stainless steel plate, and the end cap is a cast aluminum piece or a workpiece, which is connected to the cylinder by a stainless steel screw. The motor drives the cylinder, the magnetic roller and the brush roller to make a rotary motion through the reducer or directly using the stepless speed regulating motor. The magnetic system is an open magnetic system, mounted in a cylinder and exposed to full magnetic. The magnetic block is mounted on the bottom plate of the yoke by a stainless steel bolt, the shaft of the yoke protrudes out of the tube, and the arm end is fixed with a turning arm. Pull the arm to adjust the magnetic system yaw angle. After adjustment, it can be fixed with the lever. The working area of the tank is made of stainless steel, and the rest of the frame and the tank are welded with ordinary steel.