water cooling electromagnetic separator for Feldspar

PTMS MAGNETIC SEPARATOR

what is magnetic separation method in hindi？

The magnetic separator is used for sorting magnetic and magnetic substances, mainly for iron removal or resource recovery. For the magnetic separation industry, the requirements for the overflow of the magnetic separator are very high, but the overflow anomaly is often a very easy failure, and the consequence is the quality of the selection. Let's analyze the cause of the abnormal overflow of the magnetic separator.

The reasons for the abnormality of the magnetic separator overflow are:

1. There is accumulated material in the feeding trough, or the small tube in the groove of the feeding trough to the bottom of the drum is blocked, resulting in uneven overflow and tumbling. For such reasons, it should be cleaned up in time or added with a small amount of water for material dilution, and frequent testing and cleaning is also necessary. ,

2. There is mud in the groove at the bottom of the drum, resulting in uneven overflow and tumbling.

3. The opening at the bottom of the overflow tank is too large, causing the overflow to be too small.

The three reasons for abnormal overflow of magnetic separation equipment are often caused by excessive feed concentration. Therefore, when the material is quenched and tempered, it is necessary to grasp the concentration of the material and pay attention to cleaning the residual materials to avoid the next use. A condition of blockage.