electromagnetic separation

PTMS MAGNETIC SEPARATOR

what is magnetic separation in science？

The rectifier circuit of the dry electromagnetic iron remover is actually the application of the electromagnetic iron remover control cabinet:

1. The control cabinet is a supply device for the DC power supply required for the iron remover, and is also a control device for the operation of the entire iron remover. After the iron remover is hoisted, the power supply of the iron remover can be connected according to the electrical wiring diagram;

2. The control cabinet should be placed in a place that is dusty, dry, free from rain and snow, well ventilated and easy to operate and observe;

3. Before use, check whether the electrical components, connecting wires and fasteners are loose or damaged due to long-distance transportation. The wiring should correctly distinguish the output and input terminals;

4. The control cabinet shall be dusted at least once a quarter, and check whether the electrical contacts are loose or not, and the problems are repaired in time;

5. If the silicon rectifier diode is damaged, the diode of the same type should be used for replacement, but it must be noted that the polarity of the symbol "" on the diode is the same as the original one, otherwise it cannot be replaced;

6. If the fuse used in the control cabinet is damaged, the cause should be selected according to the schematic diagram of the schematic.