electromagnetic separator manufacturer
PTMS MAGNETIC SEPARATOR
what is magnetic separation method for concentration of ore？
The iron remover is divided into two types: an electromagnetic iron remover and a permanent magnet iron remover.
1. When selecting the iron remover, the user must first consider whether it is the conveyor belt, bandwidth, belt speed, inclination, material properties, humidity, particle size, thickness, the amount of iron in the material, the size and nature of the ferromagnetic material. , in addition to iron requirements, the use of the environment (temperature, humidity, dust, with or without corrosive, etc.), the characteristics of the iron remover itself, the location of the installation, space, etc.
2. When there is more iron in the material, RCDC, RCDD, RCDF series self-unloading electromagnetic iron remover for continuous automatic iron removal; RCYC, RCYD series self-unloading permanent magnet separator; RCT series permanent magnet roller; CFDL Series of electromagnetic rollers.
3. When the iron content in the material is small, the RCYB series permanent magnet iron remover, RCDA, RCDB, RCDE, CF series electromagnetic iron remover should be used.
4. When the ferromagnetic material in the material is particularly small, the GJT series metal detector and the strong magnetic self-unloading electric and permanent magnet iron remover are used together to achieve automatic monitoring and automatic iron removal, which has energy saving, long life and iron removal. Good results and so on.
5. When using hanging electric and permanent magnet iron remover, if the material is too thick, it can be used with WCTG series non-magnetic idler to improve the removal rate. The suspension height can also be appropriately reduced to achieve the desired iron removal effect.
6. When the use environment (such as dust, smoke, dust) is more serious, CF, RCDB, RCDE series fully sealed structure of electromagnetic iron remover, RCY series permanent magnet iron remover should be used. 7. When the material contains non-magnetic metal materials that can not be adsorbed by the iron remover, the GJT series metal detector should be used to detect the metal objects, and the iron is automatically removed after the alarm is automatically stopped.
8. When the user does not use the conveyor belt and uses the chute, pipeline, chain plate machine, hoist and other equipment to transport materials, the RCY.G.T series pipeline type permanent magnet separator should be used.
9. For occasions with high iron removal requirements, if the required suspension height is greater than the rated suspension height or the material thickness is greater than the rated thickness, the iron remover larger than this specification or multi-stage iron removal shall be used.
