kaolin clay magnet requirements

PTMS MAGNETIC SEPARATOR

what is magnetic separation method for concentration of ore?

(1) The purpose of non-metallic ore dressing is usually to obtain a product with certain physicochemical properties, rather than to obtain one or several useful elements in the mineral.

(2) The non-metallic ore dressing process should maintain the crystal structure of useful minerals as much as possible so as not to affect their industrial use and use value.

(3) The calculation of non-metallic ore dressing index is generally based on the content of useful minerals, and the oxide grade and the recovery rate of useful minerals are often expressed in the form of oxides, rather than the content of certain elements in minerals.

(4) Non-metallic ore beneficiation purification not only enriches useful minerals, removes harmful impurities, but also grinds and classifies products of different specifications. Iron removal equipment Iron removal equipment refers to some ore or fireproof materials that do not require iron or some iron elements to affect the quality of the material. The iron is removed or extracted, and a magnetic separation equipment that purifies the purity of raw ore and raw materials has been achieved. Iron removal equipment can be broadly divided into two categories: iron remover and strong magnetic iron removal equipment. The iron remover is generally used above the belt conveyor, and the suspension is at a certain height to remove the magnetic material and the mechanical wear caused by the crushing in the material. The magnetic field strength of the device is mainly for the ferromagnetic FE3O4. Perform iron removal operations. The iron remover is divided into permanent magnet and electromagnetic according to the medium. The strong magnetic iron removal equipment is mainly used in the purification of minerals such as feldspar, quartz sand, calcite and chlorite. The high field strength of the strong magnetic iron removal equipment is used to remove FE2O3 from these minerals to achieve FE2O3 in the ore. The reduction in content ultimately leads to the purpose of purification of the mineral. The application of iron removal equipment is long used in the beneficiation of kaolin, kyanite, quartz, feldspar, tourmaline, etc. to remove iron and titanium minerals.