Wet magnetic separator

The results of the analysis of the main chemical composition of the ore show that under the condition of a stage of closed circuit grinding fineness of -0.076 mm accounting for 53. 74%, the process of 1 roughing, 2 cleaning and 1 scavenging is adopted for sulfur separation. After the closed circuit grinding of the coarse concentrate to -0.076 mm accounting for 71. 27% by weak magnetic PTMS magnetic separator,

PTMS magnetic separation

A magnetite concentrate was obtained by a low intensity magnetic separation (PTMS) and a concentration magnetic separation. A high intensity magnetic separation was conducted after the combined concentration of low intensity magnetic roughing tailings and low intensity magnetic separation tailings, and a spiral chute gravity separation was conducted after the combined concentration of high intensity magnetic separation concentrate and low intensity magnetic concentration tailings. The sulfur grade and sulfur recovery were 44.12% and 54.92% respectively Of sulfur concentrate,

what is magnetic separation in Kaolin?

A concentrate with a mineral grade of 65.03%, a sulfur content of 0.51% and a mineral recovery of 72.26%, and a gravity concentrate with a mineral grade of 45.32%, a sulfur content of 2.91% and a mineral recovery of 1.43%. PTMS magnetic separator can remove the iron inside (Fe2O3).
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com