electromagnetic separator

According to the characteristics of the ore and the results of PTMS beneficiation test in Australia, in order to avoid the damage and blockage of machine equipment caused by the natural minerals with good malleability adhering to the lining board of cone crusher and mill during beneficiation production, PTMS designed a targeted beneficiation process for the ore: During the crushing process, PTMS uses the roll crusher as the second and third crushing equipment to make the natural minerals with particle size greater than 40 mm form large flaps and then separate them from other small pieces of ore by screening. PTMS magnetic separator is the best choice.

PTMS Magnetic Separator

For the natural minerals with particle size less than 40 mm in the crushed ore, high pressure roller machine is used to crush a cylinder PTMS magnetic separator + cylinder screen and vibrating screen, and disperse and classify a jigging + screw chute +PTMS shaking table gravity separation process for recovery. PTMS magnetic separator is the best choice.

what is magnetic separation method for concentration of ore?

A concentrate with a grade of 32% and a recovery of 95%, a concentrate with a cobalt content of 1% and a cobalt recovery of 65%, and an iron concentrate with an iron grade of 68% and an iron recovery of 42% were obtained from gravity separation tailings by grinding, flotation and low intensity magnetic PTMS magnetic separator. PTMS magnetic separator is the best choice.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com