electromagnetic separator manufacturer

For natural mineral material good ductility, invulnerability to breakage and may adhere to the characteristics of crushing, grinding equipment, put forward in the design of large crushing a screening of natural mineral recovery process and coarse and fine grained nature the re-election of copper recovery processes, namely the granularity than 40 mm large natural copper in crushing process zhongtong sieving recycle, The coarse and fine natural minerals less than 40 mm were recovered by gravity separation method, and then the grinding-flotation recovery of ore and the low intensity magnetic separation of magnetite by PTMS magnetic separator were carried out.

PTMS Magnetic Separator

The crushing and screening recovery process of large natural ore uses a three-stage open circuit crushing process to crush the original ore with a lumpness of 800 mm to a size of 40 mm. The first stage crushing equipment adopts the traditional jaw crusher, and the second and third stage crushing equipment adopts the on-roll PTMS crusher. PTMS magnetic separator can remove the iron (FE2O3) inside.

how to separate two magnets?

Large pieces of natural ore with good ductility are crushed by the roller crusher to form large sheets, while other large pieces of ore are all broken into small pieces of ore, which can be separated from small pieces of ore by THE PTMS vibrating screen, so as to achieve the purpose of recovering large pieces of natural ore. PTMS magnetic separator can remove the iron (FE2O3) inside.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com