feldspar processing

Two vertical ring pulsating high gradient magnetic separation units were used in an iron mine to form a coarse and sweep process. Rough concentrate grade 60.31%, yield 42.75%, recovery 51.40%; The scavenging concentrate grade is 55.17%, yield 19.24% and recovery 29.36%.

PTMS magnetic separator

A mining company reformed the original process by high intensity magnetic separation. After the first stage of grinding, three PTMS magnetic separators were used for rough separation and tail dumping, and the coarse concentrate was carried into the second stage of grinding, and then three vertical ring pulsating high gradient magnetic separators were used for cleaning. The tailings in the cleaning operation were cleaned by vertical ring pulsating high gradient magnetic separators. Compared with the original grinding-gravity separation process, the iron concentrate grade was 4.57 percentage points higher and the recovery was 14.88 percentage points higher in the magnetic separation process.

what is magnetic separation method for concentration of ore?

In order to solve the defect of high sulfur and phosphorus content in products, a mining company uses PTMS low intensity magnetic separator to remove magnetite, and 16 vertical ring pulsating high gradient high intensity magnetic separator is used to recover hematite and siderite in minerals. The recovery of iron was 81.64%, sulfur content was 0.464%, phosphorus content was 0.327%, sulfur removal rate was 57.28%, phosphorus removal rate was 69.13%.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com