magnetic separator factory

Working clearance (that is, the gap between the cylinder and the bottom of the tank); The so-called working gap of the magnetic separator is the distance between the cylinder and the tank.
The size of this spacing is one of the factors affecting the quality of separate concentrate. If the gap is too small, that is, the distance between the barrel skin and the tank is too close, the pulp will not be smooth and affect the processing capacity, but also because of the spacing is too small, the particles regardless of the magnetic size will be fully attracted to the barrel skin. The main reason is that the pulp is too close to the magnetic field and the magnetic field intensity is very high. PTMS magnetic separator is the best choice.

PTMS MAGNETIC SEPARATOR

However, it is beneficial to reduce tailings grade and increase recovery rate. If the spacing is too large, only the strong magnetic particles are selected, and the weak ones are not selected. Although the concentrate grade is improved, the tailings grade is also increased and the recovery rate is reduced. So it is very important to adjust the gap between work. PTMS magnetic separator is the best choice.

what is magnetic bead separation?

In field production, the working gap is generally adjusted within the range of 35-60 mm as required. The working gap can be adjusted and changed by the gasket under the Angle steel of the bracket. PTMS magnetic separator is the best choice.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com