feldspar processing

Countercurrent PTMS magnetic separator feeding direction and the rotation direction of the cylinder or magnetic products in the opposite direction. Pulp from the feeding box directly to the magnetic system below the cylinder, non-magnetic particles and magnetic particles are very weak from the bottom of the magnetic system below the left edge of the tailings hole discharge, magnetic particles with the cylinder against the direction of the ore was brought to the concentrate end, into the concentrate tank.

PTMS magnetic separator

Countercurrent PTMS magnetic separator is suitable for coarse separation and scavenging of fine strong magnetic minerals with particle size less than 0.6 mm. This is because the tailings discharge outlet is far from the ore end. The separation time is longer, the recovery rate is higher, and the discharge end of the concentrate is close to the ore feed, and the magnetic turn effect is poor, so the concentrate grade is lower. Countercurrent type magnetic separator is not suitable for the treatment of coarse ore, because of coarse particle size, easy deposition of ore particles to block the separation space.

what is magnetic separation method for concentration of ore？

PTMS is the main PTMS magnetic separation equipment professional company, PTMS magnetic separation equipment for kaolin, potassium sodium feldspar, quartz sand removal of iron (Fe2O3). PTMS to provide customers with high quality PTMS magnetic separator, in addition to iron equipment and other products and services, the best choice of PTMS magnetic separator. PTMS develops, designs, and sells mining machinery, iron removal equipment, and dry magnetic separators.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com