high intensity magnetic separator

There are many factors that affect the operation of wet permanent magnet drum PTMS magnetic separator, such as bottom box type, magnetic system structure, magnetic field characteristics, magnetic system deviation Angle, working gap, separation concentration and cylinder speed, etc.

PTMS magnetic separator

If the deviation Angle of magnetic system of wet permanent magnet drum PTMS magnetic separator is not appropriate, the separation index will be obviously affected. The deviation Angle of magnetic system is the included Angle between the center line of magnetic system arc surface and the vertical line of the center of cylinder. After the magnetic system is biased, the grade of tailings is low, but when the magnetic system is large, the grade of tailings is increased because the concentrate can not be lifted to the concentrate end and fall off. If the magnetic system is biased, then the concentrate is raised too high, the sweep area is shortened, and the grade of tailings is increased, so the magnetic system deviation Angle should be adjusted to moderate position.

what is magnetic separation in Quartz？

The cylinder speed of wet permanent magnetic cylinder PTMS magnetic separator also has an impact on the separation index, low speed, low output. High speed, the centrifugal force of the ore particles is large, the magnetic turnover effect per unit time increases, the concentrate grade and processing capacity are high, and the recovery rate is reduced.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com