High quality magnetic separator

The distance between the surface of the coarse selection cylinder and the bottom plate of the wet permanent magnet drum PTMS magnetic separator is called the working gap. The size of the working gap will affect the sorting effect.

PTMS magnetic separator

The gap is large and the pulp flow is also large, which is conducive to improving the processing capacity. However, due to the distance from the cylinder surface and the low magnetic field intensity, the grade of tailings will increase and the metal recovery rate will be reduced. On the contrary, if the working gap is small, then increase the magnetic field force, will reduce the concentrate grade, but the recovery rate can be higher.

what is magnetic separation ？

If the working gap is too small, the pulp flow rate will be too fast, so that the ore particles can not suck to the surface of the cylinder will be carried to the tailings by the pulp flow, which will cause the grade of tailings to increase, and even make it difficult to discharge tailings, the phenomenon of "full tank". Therefore, proper working clearance should be ensured during installation and maintenance of wet permanent magnet drum PTMS magnetic separator.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com