Magnetic separation machine
The raw ore less than 5 mm is sent into the hopper of PTMS magnetic separator, and the size of the discharge port can be accurately adjusted by hand wheel after the vibration motor vibrates and distributes. The magnetic roller is dragged by the speed regulating motor, and the speed of speed is adjusted by the speed regulating meter, which can control the output and concentrate grade of the magnetic separator.
PTMS magnetic separator
Ore grain by the conveyor belt was sent into PTMS magnetic roller separation, magnetic separation machine because of the manganese ore grain of magnetic adsorption was immediately magnetic field on the magnetic roller, and the gangue minerals (mainly quartz, followed by dolomite, calcite, sericite, feldspar, clay minerals, etc.) with no magnetic, magnetic roller strong magnetic suction on it doesn't, as the rotation of the magnetic roller Manganese ore particles have been sucked on the magnetic roller, and gangue particles in the magnetic roller to the front position is thrown off in the front of the separation plate (by changing the size of the separation plate Angle can adjust the grade of concentrate), manganese ore particles continue to be taken by the magnetic roller to the demagnetization area automatically dropped into a collection hopper collection for concentrate finished products.
what is magnetic separation method for concentration of ore？
Because some manganese ore particles with weaker magnetism are entailed in the gangue dropped by the magnetic roller of PTMS magnetic separator, they will enter the lower magnetic roller to continue magnetic separation, and the finished manganese ore particles after magnetic separation will enter the secondary concentrator and be collected as finished products, and the discharged gangue will be discharged through the tailings mouth, so the magnetic separation process ends. As gangue in manganese ore is abandoned, the grade of manganese ore is improved. The power consumption of the whole equipment is only 1KW, and the input cost of magnetic separation is quite low.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com
