Welcome to Foshan Powtech Technology Company Limited!https://www.powtechina.com
PTMS magnetic separator magnetic separation - fine screen process
published date: 2022/1/18

feldspar mineral processing

PTMS magnetic separator magnetic separation - fine screen process is characterized by three sections of grinding magnetic separation and four sections of fine screen.

PTMS magnetic separator

First of all, the ore is ground to 0.4mm or 0.3mm, so that gangue and iron minerals are partially dissociated, magnetic separation is carried out by PTMS magnetic separator, and part of the final tailings are discharged. The coarse concentrate is then grinded to about 0.1mm by the second stage, and then desliming and magnetic separation are carried out, and some tailings are discharged.

what is magnetic bead separation?

Magnetic concentrate of PTMS magnetic separator enters two sections of fine screen, under the screen products to dehydrate and filter concentrate, on the screen products through magnetic separation and the third section of grinding, and then into the third and fourth sections of fine screen; The products on the screen return to the magnetic separation operation before grinding and regrinding, and the products under the screen enter the last stage of magnetic separation to obtain concentrate and tailings. The concentrate and tailings from each stage of separation operation are combined into final concentrate and tailings respectively.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com

MAGNETIC SEPARATOR 20220118748

Share to:

Powtech Machinery Company produce magnetic separator, Industrial Magnetic Separators, Industrial magnetic separation equipments,Magnetic Equipment,Permanent Suspension Magnet,Vibrating Equipment