magnetic separator supplier

Dry method is generally to produce the raw ore through the crusher crushing to about 25mm, into the cage crusher, so that the particle size is reduced to about 6mm. Hot air blown into the cage crusher reduces the moisture content of kaolin from about 20 percent to about 10 percent. The crushed ore is further finely ground by an air-blown Raymond mill equipped with PTMS centrifuge and cyclone dust collector. The process can remove most of the sand, suitable for processing those ores with high whiteness, low sand content and suitable particle size distribution. Kaolin PTMS magnetic separator dry process production cost is low, the product is usually used in rubber, plastic and papermaking industries such as low-cost filler.

PTMS magnetic separator

Wet processing technology includes mud dispersion, classification, impurity separation and product treatment. The general principle process is: raw ore → crushing → ramming → desanding → cyclone classification → stripping → centrifuge classification →PTMS magnetic separator magnetic separation (or increase bleaching)→ concentration → pressure filtration → drying → ceramic or paper coating level products.

what is magnetic bead separation？

The general principle process of coal measure (hard) kaolin processing is: raw ore → crushing → pounding → cyclone classification → stripping → centrifugal classification → concentration → pressure filtration → internal steam drying → calcining → depolymerization →PTMS magnetic separator → filler grade or paper coating grade kaolin.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com