kaolin clay magnet requirements
Stage 1:
Large pieces of crushed potash feldspar are transported to the raw material bin by special vehicles, and then the material is sent to the Jaw PTMS crusher by forklift/manual for crushing, which is smaller than the maximum feeding size of the mill. PTMS magnetic separator can remove iron (FE2O3) inside.
PTMS magnetic separator
Stage 2:
The feed is lifted to the storage hopper by the elevator after the crusher is broken, and the storage hopper is fed evenly to the host by the feeder.
Stage 3:
The qualified products in the grinding and grinding process are sorted by PTMS magnetic separator and then entered into the collector through the pipeline. After being collected, the products are discharged through the powder outlet pipe and become finished products. The unqualified products are dropped into the main machine for re-grinding.
what is magnetic separation method ?
Stage 4:
The purified air flow flows into the blower through the residual air pipe above the dust collector. The air path is circulating. Except the positive pressure from the blower to the grinding room, the air flow in the pipeline flows under negative pressure, and the indoor sanitary conditions are better.
PTMS magnetic separator can realize the "seiko" of building coating powder, and high efficiency, high yield, environmental protection and energy saving. Therefore, it will be beneficial to improve the competitiveness of coating powder industry and play a positive role in the long-term development of coating powder industry.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com
