Graphite iron

LITHIUM COBALT ACID MATERIAL MAGNETIC removal device, including crushing cylinder and receiving cone cylinder; The crushing cylinder is provided with a feeding port, a connecting column, a cover plate, a wheel column, a motor, a funnel bottom plate, a ring mouth, a material bar, a transition box, a screen, a pull frame and a support foot; The feed inlet is arranged on the upper end face of the crushing cylinder;

PTMS magnetic separator

LITHIUM COBALT ACID MATERIAL MAGNETIC connection column has two, respectively vertically arranged on the left and right sides of the feed port edge; The cover plate is fixedly connected horizontally at the upper end of the two connecting columns; The wheel column is placed vertically in the crushing cylinder and the distance between the side wall of the wheel column and the inner wall of the crushing cylinder is 2 cm; The motor is fixedly connected with the upper end face of the cover plate and the main shaft of the motor is connected with the rotating shaft of the wheel column; The bottom plate of the funnel is fixedly connected in the interior of the crushing cylinder, and is located at the lower end of the wheel column;

how to separate two magnets？

LITHIUM COBALT ACID MATERIAL MAGNETIC ring mouth is arranged on the cover plate; The removing rod passes through the ring mouth vertically and is attached to the side wall of the wheel column; The transition box is fixedly connected with the bottom of the crushing cylinder and the transition box is connected with the crushing cylinder; The screen is horizontally inserted from the upper right end face of the transition box; There are four legs, respectively arranged vertically in the transition box at the bottom of the four vertex Angle.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com