Graphite iron

The spray dryer can evaporate the moisture of the material under vacuum, increase the heat transfer driving force of the evaporator, and then blow the water vapor away by the wind. Rapid evaporation of 65-98% of the water, so that the ternary cathode MATERIAL can become powder or granular products, into PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC removal effect of ternary cathode MATERIAL is good. It is suitable for the method of dewatering and drying battery cathode material.

PTMS magnetic separator

The loading and unloading equipment is brick and wood for raw material supply services, through the manipulator loading and unloading, raw materials in the loading and unloading process does not damage the material surface, and the equipment is suitable for all kinds of metal plate loading and unloading. This equipment uses electromagnetic contactor and electronic parts, currently operating with fewer failures, and long life. It can be used with PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC to remove iron from ternary cathode MATERIAL.

what is magnetic separation used for？

PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC removal filter system
LITHIUM COBALT ACID MATERIAL MAGNETIC removal iron filtration system is to filter the iron in the ternary cathode MATERIAL. When the raw MATERIAL enters the main filter net, part of the fine iron filings will be absorbed by the MAGNETIC like ferromagnetism. Through MAGNETIC adsorption of iron, the iron can be filtered. Then through the filter, so that the three positive material force inside the paste is out.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com