Graphite iron

The positive electrode is the source of embedded lithium ions in the battery. The basic requirements include: the discharge reaction should have a negative Gibbs free energy (higher discharge voltage); The basic structure has a low molecular weight and can insert a large amount of Li+ (high mass specific heat capacity). The Li+ diffusion and electron migration of the main structure must be fast (high power density); Li+ embedment and stripping are reversible, and the main structure changes are small (long cycle life). PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC after iron removal good chemical stability, non-toxic, cheap; The material is easy to prepare.

PTMS magnetic separator

The main cathode materials include lithium iron phosphate, ternary lithium, lithium cobalt acid, lithium manganese acid and so on. Among them, PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC ternary LITHIUM and LITHIUM iron phosphate after iron removal have comprehensive advantages relative to LITHIUM COBALT ACID and LITHIUM manganese ACID in performance, life, safety and other aspects.

what is magnetic bead separation ？

PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC removal filter system
LITHIUM COBALT ACID MATERIAL MAGNETIC removal iron filtration system is to filter the iron in the ternary cathode MATERIAL. When the raw MATERIAL enters the main filter net, part of the fine iron filings will be absorbed by the MAGNETIC like ferromagnetism. Through MAGNETIC adsorption of iron, the iron can be filtered. Then through the filter, so that the three positive material force inside the paste is out.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com