Remove iron from lithium iron phosphate

The iron in the positive electrode ternary MATERIAL of LITHIUM battery must be removed, PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC iron removal purity requirements are very high, but it is best not to mix in the production process of iron, which requires the equipment to use KN17 polymer ceramic polymer to make protective coating, After adding KN17 polymer ceramic polymer, the lithium battery material can be completely isolated from metal, such as nickel and copper, which can not be removed by simple magnetic separation, so the better way is to isolate.

PTMS magnetic separator

LITHIUM battery is mainly composed of cathode MATERIAL, cathode MATERIAL, diaphragm and electrolyte, etc. Cathode MATERIAL occupies a large proportion in the total cost of LITHIUM battery, and the performance of PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC has a direct impact on the performance indicators of LITHIUM battery. So lithium anode material plays a key role in lithium battery.

what is magnetic separation used for ？

PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC removal filter system
LITHIUM COBALT ACID MATERIAL MAGNETIC removal iron filtration system is to filter the iron in the ternary cathode MATERIAL. When the raw MATERIAL enters the main filter net, part of the fine iron filings will be absorbed by the MAGNETIC like ferromagnetism. Through MAGNETIC adsorption of iron, the iron can be filtered. Then through the filter, so that the three positive material force inside the paste is out.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com