wet high intensity magnetic separator

Production: Kaolin deposit is relatively gentle, the thickness of the ore layer is larger, the cable bucket excavator or shovel, the topsoil will be removed and stacked separately, then mining kaolin, into the dump truck, sent to PTMS magnetic separator factory or with the mobile mixer made of pulp, the spiral classifier desanding and screening machine to coarse and mica, The fine pulp is pumped to the concentrator.

PTMS magnetic separation

Beneficiation purification: Kaolin beneficiation method is usually the pulp into the rectangular rake precipitation tank precipitation. The coarse particle precipitate larger than 43μm is removed by the rake in the precipitation tank, the pulp less than 43μm overflow from the precipitation tank, sieve mica after the pulp pump into the storage tank, then the horizontal centrifuge for sorting, overflow slurry -2μm up to 80%. Another part of pulp into the vertical PTMS magnetic separator for sorting, overflow -2μm accounted for 98%.

what is magnetic separation in Kaolin？

According to different uses, the two kinds of pulp are mixed in different proportions to get different products. A drum vacuum filter was used for dehydration, and plate dryers, drum dryers and spray dryers were used for drying kaolin. PTMS magnetic separator iron removal process is the use of magnetic separation or chemical methods to improve whiteness.

Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com