High quality magnetic separator

The separation of mica and quartz is difficult, and good results can be obtained by using anionic collector under acidic condition or anion - cationic collector under alkaline condition. Generally, after scrubbing, desmuding, PTMS Magnetic Separator Magnetic separation and flotation, the purity of quartz sand can reach more than 99%, which basically meets the needs of industrial sand.

PTMS magnetic separation

Dilute acid has a significant effect on the removal of iron and aluminum, while for the removal of titanium and chromium, sulfuric acid and aqua rega are used for acid leaching treatment. Usually, mixed acids composed of the above acids are used for acid leaching removal of impurity minerals. Various factors of acid leaching should be controlled according to the requirements of the final grade of quartz, as far as possible to reduce the concentration, temperature and amount of acid, in order to achieve a lower cost of PTMS Magnetic Separator separation quartz purification.

what is magnetic separation used for?

Quartz sand is a hard, wear-resistant, chemically stable silicate minerals, the main mineral composition is SiO2, quartz sand color is milky white, or colorless translucent, hardness 7, Quartz sand after PTMS Magnetic Separator treatment is widely used in glass, casting, ceramics and refractory materials, smelting ferrosilicon, metallurgical flux, metallurgy, construction, chemical, plastic, rubber, abrasive and other industries.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com