PTMS Magnetic Separator removes non-magnetic impurities from fine quartz sand powder
published date: 2022/10/2
magnetic separator supplier
Using a professional roaster, the quartz ore particles were calcined for 2-5 hours under the condition of 300℃-1500℃. Chlorination roasting is the main method to remove crystal lattice impurities. Different chlorination agents and crystal lattice impurities have great differences in their action modes and effects. Water crushing: the quartz particles after burning are quickly placed in hot water at room temperature to cool, dissolve the soluble material generated by roasting, and by heating the water for 0.5-2 hours, in order to increase the solubility of the part of the soluble material in water, in order to PTMS Magnetic Separator iron removal.
PTMS magnetic separation
Flotation: add flotation agent to the fine quartz sand powder after water crushing to remove impurities with specific gravity less than 1. PTMS Magnetic Separator is mainly used to remove non-magnetic impurities, such as feldspar and pure Muscovite. Deionizing water washing: deionizing water washing to remove residual flotation agent and impurities on the surface of quartz sand;
what is magnetic separation used for?
Drying: first PTMS Magnetic Separator to iron, ion washed quartz sand air dry (air dry) to remove a large amount of water, and then dried in special drying equipment, and heated to 100℃-200℃;
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com
