Wet magnetic separator

Dry PTMS Magnetic Separator is generally used to crush the mined raw ore to about 25mm through the crusher, and then into the cage crusher to reduce the particle size to about 6mm. The hot air blown into the cage crusher reduces the moisture content of kaolin from about 20% to about 10% at the time of extraction. The crushed ore is further refined by a blown Raymond mill equipped with a centrifuge and a cyclone dust collector.

PTMS magnetic separator

Dry PTMS Magnetic Separator process can remove most of the sand and stone, which is suitable for processing those ores with high whiteness, low sand and stone content and suitable particle size distribution. The dry process has low production cost, and the products are usually used as low cost fillers in rubber, plastic and papermaking industries.

what is magnetic bead separation?

Wet processing technology includes several stages, such as slurry dispersion, classification, impurity sorting and product treatment. The general principle process is: raw ore → crushing → pulping → de-sanding → cyclone classification → stripping → centrifuge classification →PTMS Magnetic Separator→ bleaching → concentration → filtration → drying → ceramic grade or paper coating grade products.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com