PTMS Magnetic Separator is beneficial to reduce the content of alumina in tailings
electromagnetic separation
Pulping and screening are completed in the same equipment, that is, a screen is installed at the overflow mouth of the pulping pool to control the overflow size of the pulping. In the ramming tank, the first is the dispersion of mud and sand, and the second is the continuous mud of kaolin, and the particle size becomes fine. The slurry overflow is generally separated by centrifugal classification equipment. PTMS Magnetic Separator is usually used for coarse selection and sweeping.
PTMS magnetic separator
PTMS Magnetic Separator is usually used to select small cone Angle hydrocyclone. The former is convenient to reduce the content of alumina in tailings and improve the recovery of kaolinite. The latter is beneficial to increase the fineness and content of fine mud. Sweep and select overflow and sand settling to return to the process of re-selection, and use the concentrator or centrifuge to recover part of the fine mud before return, which can not only improve the recovery of fine mud, but also ensure the concentration of circulating slurry, so as to reduce the concentration fluctuation of the selected ore.
what is magnetic separation method in hindi?
Coarse tail and thin tail generally contain high alumina, can be used as daily ceramics or building ceramics raw materials. Therefore, the kaolin concentrator of PTMS Magnetic Separator selected paper mud is generally a non-tailing concentrator. If a hydrocyclone is not used as a grading device, selective flocculation may also be used, which results in a finer product.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com
