Welcome to Foshan Powtech Technology Company Limited!https://www.powtechina.com
What are the stages of wet PTMS Magnetic Separator process
published date: 2022/10/22

electromagnetic separator manufacturer

When the whiteness of the product is required by dry method, dry iron removal must be carried out on the produced product. The advantages of dry process are that it can save the process of product dehydration and dry operation, reduce the loss of ash powder, short process flow, low production cost, suitable for drought and water shortage areas. However, to get high purity and high quality kaolin, we must rely on wet PTMS Magnetic Separator process.

PTMS magnetic separator

 
The wet PTMS Magnetic Separator process consists of three stages: ore preparation, mineral processing and product processing. The preparation phase includes batching, crushing and pulping operations. Pulping is the pulping of kaolin raw ore mixed with water and dispersant in pulping machine. The pulping operation can disperse the raw ore, prepare appropriate fineness kaolin pulp for separation operation, and remove the large sand and stone at the same time.

what is magnetic separation?


The beneficiation stage may include hydraulic classification, flotation, selective flocculation, PTMS Magnetic Separator iron removal, chemical treatment (bleaching) and other operations to remove different impurities. The prepared pulp is first desamped by a rake washing box, floating-tank classifier or cyclone, and then divided into coarse and fine particle grades by continuous centrifuge, hydrocyclone, hydraulic sorter or vibrating fine screen (325 mesh).
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com

magnetic separation 20221022650

Share to:

Powtech Machinery Company produce magnetic separator, Industrial Magnetic Separators, Industrial magnetic separation equipments,Magnetic Equipment,Permanent Suspension Magnet,Vibrating Equipment