PTMS Magnetic Separator beneficiation process can increase the amount of kaolin in plastic rubber
iron separator machine
Surface modification, kaolin is coated with coupling agent to increase the amount of kaolin added in plastic and rubber, which is used to treat kaolin filler for rubber and plastic. This is the necessary process of kaolin PTMS Magnetic Separator beneficiation process. The dry method is generally the mined raw ore through the crusher, broken to about 25mm, into the cage crusher, so that the particle size is reduced to about 6mm.
PTMS magnetic separator
The hot air blown into the cage PTMS crusher reduces the moisture content of kaolin from about 20% at the time of extraction to about 10%. The crushed ore is further pulverized by a blow type equipped with a centrifuge and a cyclone dust collector. The particles of kaolin aggregate were separated into thin crystal slices by stirring fine medium ball in the peeling machine. Then the iron was removed by PTMS Magnetic Separator to produce the scraper coated kaolin with particle size less than 2μm and content more than 90%.
what is magnetic separation method in hindi?
When calcined at 800 ~ 1 000℃, kaolin lost water, phase transformation, and some impurities volatilized, improve the whiteness and insulation of kaolin, and produce cable and rubber plastic filler. PTMS Magnetic Separator is an essential processing method for hard kaolin.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com
