Welcome to Foshan Powtech Technology Company Limited!https://www.powtechina.com
The processing technology of PTMS Magnetic Separator of kaolin ore depends on the nature of the ore
published date: 2022/10/31

magnetic drum separator

The genetic types of kaolin deposits are mainly three types: weathering type, sedimentary type and hydrothermal alteration type. The processing technology of kaolin ore depends on the nature of the ore and the end use of the product. There are two kinds of PTMS Magnetic Separator processes used in industrial production: dry process and wet process. Usually hard kaolin is produced by dry process and soft kaolin is produced by wet process.

PTMS magnetic separator


Dry process is a simple and economical PTMS Magnetic Separator processing process. After the mined raw ore is crushed to 25.4mm by hammer crusher, it is given to the cage crusher to reduce the particle size to 6.35mm. The hot air in the cage crusher will reduce the moisture of kaolin from 20% to about 10%. The crushed ore is further refined by a blown Raymond mill equipped with a centrifuge and a cyclone dust collector.

what is magnetic bead separation?


The wet process includes three stages: ore preparation, PTMS Magnetic Separator processing and product processing. The preparation phase includes batching, crushing and pulping operations. Pulping is the pulping of kaolin raw ore mixed with water and dispersant in pulping machine. The pulping operation can disperse the raw ore, prepare appropriate fineness kaolin pulp for separation operation, and remove the large sand and stone at the same time.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com

PTMS magnetic separation 20221031856

Share to:

Powtech Machinery Company produce magnetic separator, Industrial Magnetic Separators, Industrial magnetic separation equipments,Magnetic Equipment,Permanent Suspension Magnet,Vibrating Equipment