The desagged material is sent by pipe to the spiral PTMS magnetic separator for grading
published date: 2022/11/15
magnetic separator supplier
The coarse stone powder which has been ground for the first time is separated and then re-ground into coarse PTMS magnetic separator. In this process, the hot air is accompanied by the drying of the stone powder. At the same time, a small number of stones and iron objects contained in the original powder block are also thrown to the air ring chamber. The slurry output from the ball mill is transferred to the superconducting slag remover for slag removal.
PTMS magnetic separator
The desagged material is sent to the spiral PTMS magnetic separator by pipe for classification, and the slurry overflow from the magnetic separation classification is transported to the screening and impurity removal part. The flotation part includes a rod type rinsing tank connected with the screening and impurity removal part and a stirring paddle arranged in the rod type rinsing tank. The effective area of the bottom of the rod rinsing tank is less than the area of the groove. The rod wash tank includes an inner layer made of cement pouring,
what is magnetic bead separation?
A ceramic tile outer layer is laid on the inner layer. The gas collection dust removal system includes a dust removal hood above the broken part and an exhaust pipe connected to the dust removal hood, and a dust removal chamber connected to the other end of the exhaust pipe. The upper part of the dust removal chamber is equipped with a spray head. PTMS magnetic separators can remove iron (FE2O3) in feldspar powder.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com
