Welcome to Foshan Powtech Technology Company Limited!https://www.powtechina.com
The PTMS magnetic separator process removes most of the iron sand
published date: 2023/1/10

Wet magnetic separator

Dry PTMS magnetic separator is generally used to break the extracted raw ore through the crusher to about 25mm and feed it into the cage crusher to reduce the particle size to about 6mm. Hot air blown into the cage crusher reduces the moisture content of kaolin from about 20% to about 10%. The crushed ore is further refined by an air-blown Raymond mill equipped with a centrifuge and a cyclone.

PTMS magnetic separation

 
The PTMS magnetic separator process removes most of the sand and is suitable for processing ores with high raw whiteness, low sand content and suitable particle size distribution. Dry processing has low production cost, and the products are usually used as low price fillers in rubber, plastics and paper industry. The potential output value of mineral resources is also based on the asset value of mineral resources, but it is based on the calculation of recoverable proved reserves, which is more refined than the total potential value of mineral resources.

what is magnetic separation method for concentration of ore?


The wet process includes several stages of mud dispersion, classification, impurity separation and product treatment. The general process is as follows: raw ore → crushing → ramming → desanding → cyclone classification → stripping → centrifuge classification →PTMS magnetic separator→ concentration → filter → drying → ceramic grade or papermaking coating grade products.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com

magnetic separation 20230110851

Share to:

Powtech Machinery Company produce magnetic separator, Industrial Magnetic Separators, Industrial magnetic separation equipments,Magnetic Equipment,Permanent Suspension Magnet,Vibrating Equipment