Welcome to Foshan Powtech Technology Company Limited!https://www.powtechina.com
Kaolin PTMS magnetic separator process for kaolin decarbonization and kaolin packaging
published date: 2023/1/18

electromagnetic separator manufacturer

Kaolin decarbonization: A large amount of carbon and kaolin symbiosis is the characteristic of coal measure kaolin rocks, including fixed carbon, coal chips, plant fossils and other hydrocarbons. Because of the presence of these carbon materials, the coal measure kaolin rocks become gray black, and the removal of carbon to make kaolin white is one of the main purposes of coal measure kaolin calcining. When the whiteness of the material is low, it affects the feeding volume of PTMS magnetic separator. When the color a value is less than 0, the kiln speed can be reduced, the calcining temperature can be increased, the primary or secondary air volume can be increased, and the magnetic separator volume can be reduced. When the value of hue a is greater than 0, the amount of magnetic separation can be increased.

PTMS magnetic separator

 
The shield temperature is the most fundamental parameter of reaction calcination, which is closest to the highest temperature of the material. The moisture discharge temperature reflects the amount of material in a period of time. The temperature of the material reflects the instantaneous output of the calcined white material in the kiln. When the instantaneous output is large, the temperature of the material is high, and vice versa. The material temperature is also affected by the air pressure in the kiln. When the air pressure in the kiln increases, the material temperature increases, and vice versa. PTMS magnetic separator can remove iron (FE2O3) inside.

what is magnetic separation ?

 
Kaolin packing section: Materials in the packing silo are packed according to different customer requirements and packaging specifications. For example, if the gross weight of 500kg kaolin reaches 503kg when packing and weighing, it is considered to meet the standard. At the same time, some waste products will be produced in the packing section due to discharging, which must be added to the spray for reprocessing. In order to ensure that the material added to the PTMS magnetic separator does not contain impurities, it must pass through the 1cm hole sieve.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com

magnetic separation 20230118920

Share to:

Powtech Machinery Company produce magnetic separator, Industrial Magnetic Separators, Industrial magnetic separation equipments,Magnetic Equipment,Permanent Suspension Magnet,Vibrating Equipment