A simple and economical process for processing PTMS magnetic separator
published date: 2023/1/20
feldspar mineral processing
Dry process is a simple and economical process for processing PTMS magnetic separator. The extracted raw ore is crushed to 25.4mm by hammer crusher and fed to cage crusher to reduce the particle size to 6.35mm. The hot air in the cage crusher reduces the moisture content of kaolin from 20% to 10%. The crushed ore is further refined by a blown Raymond mill equipped with a centrifuge and a cyclone.
PTMS Dry Magnetic Separator
The dry PTMS magnetic separator process removes most of the sand and is commonly used as a low-cost filler in the rubber, plastics and paper industries. When used in paper industry, the product can be used as the filler where the ash content of the filler layer is less than 10% or 12%, and the brightness requirement of the product is not high.
what is magnetic separation method?
When the dry PTMS magnetic separator process has high requirements on the whiteness of the product, dry iron removal must be carried out on the products produced by Raymond mill. The advantages of dry process are that it can save the process of dehydration and dry operation, reduce the loss of ash powder, short process, low production cost, suitable for drought and water shortage areas. But to obtain high purity and high quality kaolin it must rely on wet process.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com
