Magnetic separator

The extracted raw ore is crushed to 25.4mm by hammer crusher and fed to cage type PTMS crusher to reduce the particle size to 6.35mm. The hot air in the machine reduces the water content of kaolin from 20% to 10%. The crushed ore is then removed by a further PTMS magnetic separator process with centrifugal separation and cyclone dust removal. The product is commonly used as a low-cost filler in the rubber, plastics and paper industries.

PTMS magnetic separation

 
The wet PTMS magnetic separator process consists of several stages: slurry dispersion, classification, impurity separation and product treatment. The general principle of the process is: raw ore → crushing → ramming → sand removal → cyclone classification → stripping → centrifuge classification → magnetic separation (or bleaching)→ concentration → pressure filtration → drying → ceramic grade or papermaking coating grade products.

what is magnetic separation in chemistry?

The general principle flow of processing coal measure (hard) kaolin PTMS magnetic separator is: raw ore → crushing → ramming → cyclone classification → stripping → centrifugal classification → Concentration → press filtration → internal steam drying → calcination → depolymerization → packing grade or papermaking coating grade kaolin.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com