magnetic separator conveyor
Pickling: general particle size in 5mm or 8mm below, divided into normal temperature pickling (soaking) and heating pickling two, mainly used for the production of pottery fabric feldspar. Features: Low investment, slightly higher cost of PTMS magnetic separator process, and environmental problems.
PTMS magnetic separation
With sulfuric acid as the acid washing agent, according to the concentration of acid and potassium feldspar fine powder iron content of blending, in the sulfuric acid concentration is determined, potassium feldspar fine powder iron content is proportional to the weight of the added sulfuric acid, after pickling thoroughly remove ferric oxide and ferric oxide, separation of ferrous sulfate solution, potassium feldspar fine powder; Sifting potassium feldspar fine powder: the potassium feldspar fine powder is sent to PTMS magnetic separator20-200 mesh screen screening, the material under the screen is the finished product with iron content less than 0.24%.
what is magnetic bead separation?
Magnetic separation (high intensity magnetic separation process) : according to the size of impurities in the ore, choose the appropriate crushing process. Features: Slightly higher investment, environmental protection, lower cost of PTMS magnetic separator process.
Flotation: It is generally combined with PTMS magnetic separator process to reduce silicon and extract potassium and sodium in addition to impurities. It is generally used for the production of high-grade feldspar. Features: Large investment, high requirements for the process of the practitioners, there are a few environmental problems.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com
