magnetic separation equipment

PTMS magnetic separator is mainly prepared from the following raw materials by weight: sodium petroleum sulfonate 24 parts, modified fatty acid 24 parts, high-carbon mixed alcohol 13 parts, oleic acid 12 parts, emulsifier 13 parts, sodium alkyl hydroxamic acid 13 parts, oxidized paraffin soap 12 parts, and water 1214 parts. Then the potassium feldspar obtained after rough selection was selected, the selected collector was N dodecyl β methyl aminopropionate, and high grade potassium feldspar fine powder A was obtained after flotation.

PTMS magnetic separator

 
PTMS magnetic separator treatment of high-grade potassium feldspar: ① crushing: First, the low-grade potassium feldspar raw ore is broken with a jaw crusher, and washed through a spiral chute to remove the sludge in the raw ore, and finally dehydrated for use; ② Grinding: the potash feldspar raw ore is ground with a ball mill to obtain pulp; ③ Desliming: the ground powder material is sent into the desliming hopper or cyclone for desliming;

what is magnetic separation in Kaolin？

④ magnetic separation: after the separation of the material to remove the slime by the strength of PTMS magnetic separator magnetic separation of magnetite and other weak magnetic minerals, weak magnetic separation intensity of 130200KA/M, to obtain potassium feldspar coarse fine powder; Flotation: flotation of coarse potash feldspar concentrate at 46 52% of the pulp concentration,
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com