Welcome to Foshan Powtech Technology Company Limited!https://www.powtechina.com
PTMS magnetic separator obtained high grade potassium feldspar powder
published date: 2023/6/13

Magnetic separation machine

The flotation was carried out with one coarse selection and one  twice selection. The coarse collector was mainly prepared from the following raw materials in weight: 2 parts of sodium petroleum sulfonate , 2 parts of modified fatty acids, 1 part of high-carbon mixed alcohols, 1 part emulsifier, 1 part sodium alkyl hydroxamic acid, and 12 parts water; The collector was selected as N dodecyl β methyl aminopropionate. After PTMS magnetic separator, high grade potassium arkospar powder was obtained.

PTMS magnetic separator

 
Treatment of high grade potassium feldspar: The coarse potash feldspar concentrate is obtained by using PTMS magnetic separator process for iron removal. The magnetic separation intensity is 120200KA/M. The potassium feldspar coarse concentrate is rolled on the granite wheel mill, screened to remove fine powder and washed with water to remove surface mica; The potassium feldspar sand grains washed by water are then milled with water by a granite wheel mill lined with an edge, and the water flows out through the screen to obtain the potassium feldspar fine powder.

what is magnetic separation process?

 
The ground powder material is sent to the desliming hopper or cyclone for desliming; Magnetite and other weak magnetic minerals are separated by PTMS magnetic separator. The magnetic separation intensity is 130200KA/M to obtain high grade potassium feldspar fine powder.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com

PTMS magnetic separation 20230613954

Share to:

Powtech Machinery Company produce magnetic separator, Industrial Magnetic Separators, Industrial magnetic separation equipments,Magnetic Equipment,Permanent Suspension Magnet,Vibrating Equipment