magnetic separator for sale

In the rod abrasion test between raw ore and quartz sand larger than 0.3mm, Fe2O3 decreases from 0.19% to 0.10%, and the iron removal rate is 47.4%. Compared with other iron removal processes, PTMS magnetic separator process has the following characteristics: 1) the product quality is good, which can meet the quality requirements of float glass for high-quality silica sand; 2) Large output. At present, some small-scale production and processing enterprises use this method to remove iron more, because it is low cost and simple to operate, but the iron removal rate is relatively low.

PTMS magnetic separation

In magnetic separation, the wet PTMS magnetic separator can largely remove the weak magnetic impurity minerals, such as the associated particles, such as hematite, limonite and biotite. Under normal circumstances, for quartz sand which mainly contains weak magnetic impurity minerals, it can be selected with wet magnetic strength above 10000 ost; For strong magnetic minerals containing impurities mainly magnetite, it is best to use weak magnetic or medium magnetic selection.

what is magnetic separation method？

High quality 0.036%Fe2O3 quartz sand concentrate can be obtained by using wet PTMS magnetic separator. Wet strength iron removal is affected by feeding amount, flushing water and magnetic field intensity, among which the magnetic field intensity has the most significant effect. In addition, with the increase of the number of magnetic separation, the finer the particle size of quartz sand, the better the iron removal effect.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com