Kaolin PTMS magnetic separator Iron removal process steps
published date: 2023/7/20
iron separator machine
The PTMS magnetic separator method for iron removal of kaolin includes the following steps: 1. Put the construction residue into the mixing tank and stir with water to obtain the slurry; 2. The slurry is graded and screened to obtain the slurry; 3. Preliminary demagnetic processing was carried out on the graded and screened slurry; 4. Pickling the paste obtained after preliminary magnetic removal;
PTMS magnetic separator
5. Pour the pickling paste into the filter press, and leave 15%-25% space in the filter press; 6. In the remaining space of the filter press, inject 5%-8% of the removed iron kaolin slurry until the mud cake is pressed dry to obtain the removed iron kaolin. Slurry is introduced into PTMS magnetic separator with high gradient to obtain roughed slurry.
what is magnetic separation method in hindi?
Sulfuric acid, sulfite and oxalic acid were added into the slurry obtained after primary demagnetization for pickling. The pickling time is 25-45 minutes. Screening is carried out by a spiral classifier. Polymer flocculant was used as selective flocculant in kaolin mining. The kaolin ore will sink to the bottom, and the titanium ore will be suspended in the upper reddish brown, so you can use PTMS magnetic separator to process the kaolin ore.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com
