magnetic separators for sale
The adsorption flotation method is based on the common mechanical stirring PTMS magnetic separator as the main equipment. In a certain finness of kaolin slurry, a carrier of limestone powder is added as an adsorbent to adsorb Fe2O3 from the slurry solution to the carrier. The carrier can use its own hydrophobicity. The hydrophobicity caused by the collector can also be used to attach to the bubbles to obtain carrier foam products containing iron and in-tank products containing kaolin concentrate, so that kaolin and Fe2O3 can be separated.
PTMS magnetic separation
The adsorptive carrier not only adsorbed the iron in kaolin, but also had many effects such as absorption, condensation, binding and crystal mixing. In addition, the pH value of the slurry system, the addition time and place of the carrier also seriously affect the separation effect of PTMS magnetic separator, which makes the application of adsorption flotation method limited to a certain extent.
what is magnetic separation method in hindi?
The two-liquid flotation method is to adjust kaolin into a certain concentration of aqueous slurry, add pH regulator to adjust the pH to the required value, add collector after stirring, continue stirring for a certain time, add organic solution, and then fully stir and then stand for delamination, PTMS magnetic separator separation. Aqueous phase products (containing kaolin) and organic phase products (containing Fe2O3) are obtained.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com
